What is the use of a welding machine?

Welding Machines are used for the joining of plastic pipe and fittings. These tools can be used to join PPR, PE, and PVC pipes. Fusion machines heat up the ends of pipes and fittings, then force them together to form a bond. Welding machines support pipe sizes from 20mm to 63mm.

Features of PPR Welding Machine:

1. Accurate temperature control, high safety index, and strong environmental adaptability.
2. The heat transfer plate is made of high-quality aluminum alloy, with high thermal conductivity and strong oxidation resistance.
3. The welding method is convenient and quick, and the welding joint structure is firm and never leaks.
4. The hot-melt die adopts a unique non-stick plastic high-temperature-resistant coating (PTFE) technology, which has a long service life.
5. Dual power design, the maximum power is used for welding larger diameters to shorten the warm-up time.
6. It can be used to connect plastic pipes and fittings of various diameters by replacing the die head (specification: ф20-63mm)

This is our Facebook Website: www.facebook.com 

How to use the PPR Welding Machine

1. Fix the fusion splicer and install the heating end, put the fusion splicer on the dry rack, install the corresponding heating die according to the required pipe specifications, and tighten it with the hexagon socket, generally, the small one is at the front end, and the large one is at the rear end.
2. Turn on the power supply (note that the power supply must have a grounding protection line), follow the instructions of the corresponding model of the machine and pay attention to the change of the indicator light, and start the operation until the fusion splicer enters the working temperature control state.
3. Use a pipe cutter to cut off the pipe vertically, push the pipe and pipe fittings into the fusion splicer die without rotation at the same time, and operate as required. Immediately after the heating time is reached, the pipe and pipe fittings are removed from the die head at the same time, and inserted directly and evenly to the required depth quickly without rotation, so that an edge of uniformity is formed at the joint.